Cisco 9800-CL deployment for home ESXi LAB
Hello, after my post "Cisco 9800 with a 2,4Ghz channel plan on 1, 5, 6, 9, 11 and 13?" I was asked on how I deployed those WLC 9800-CL so, I made this video:
I hope is helpful ;)
Cisco 9800 Roam Type 802.11i Slow vs 802.11i Fast vs 802.11r
Hello, in this entry I initially though about explaining and comparing 802.11i roaming versus 802.1X with FT roaming, but then I though it may be more interesting to follow the process as seen from the Cisco 9800 WLC and DNAC, that is where I configured the packet captures, so I´ve been re-arranging the post several times. Also, we can check when the cisco 9800 WLC will show the roam type as 802.11i Slow, 802.11i Fast or 802.11r. Capturing Packets with Cisco DNA Center (Catalyst Center) This are the steps followed to get the captures on this post: 1.- From any tab on DNA Center, click the search button and type the MAC address you want to capture 2, 3.- Click on it and go to Client 360 4.- Once in Client 360, click on "Intelligent Capture" 5.- In the Intelligent Capture page for the selected device, click on "Run Packet Capture" 6.- A new tab will open, and there you can choose to do a Full Packet Capture or an Onboarding Packet Capture, program the capture or run...
Comentarios
Publicar un comentario